All posts by PC Machinery
Conveyor 1.05m L x 480mm W
Location: Palmerston North
Stockcode: PCM168
Measures: 1050mm Long (Belt Length)
x 480m Wide (Belt Width).
0.12kw Motor, no switchgear
1m travel per 1.77seconds
Price: $1,500 + gst
Conveyor 1.10m L x 300mm W
Conveyor 1.10m L x 460mm W
Conveyor 1.46m L x 280mm W
Location: Palmerston North
Stockcode: PCM164
Measures: 1460mm Long (Belt Length)
x 280mm Wide
x 830mm Tall.
0.37kw Drive Unit, 5pin Plug
Has switchboard, and also start/stop buttons
Price: $2,500 + gst
Conveyor 1.50m L x 340mm W with HOPPER
Location: Palmerston North
Stockcode: PCM160
Measures: 1500mm Long (Belt Length)
x 340mm Wide with Hopper on, otherwise 400mm Wide.
0.37kw Drive Unit, may need new belt depending on usage.
Price: $2,500 + gst
Conveyor 1.55m L x 350mm W
Location: Palmerston North
Stockcode: PCM163
Measures: 1550mm Long (Belt Length)
x 350mm Wide
No Drive Unit.
Price: $1,500 + gst
Conveyor 2.38m L x 300mm W
Location: Palmerston North
Stockcode: PCM172
Measures: 2380mm Long (Belt Length)
x 300mm Wide (Belt Width).
Motor needs to be properly secured, and roller adjusted at one end.
Priced accordingly.
Price: $1,500 + gst
Conveyor 2.75m L x 300mm W
Location: Palmerston North
Stockcode: PCM185
Measures: 2750mm Long x 300mm Wide (Belt Width – but 250mm only usable)
Discharge height as it sits is 1.25m H.
Although i would say it originally was set up on a lesser angle.
Has 3phase Roller Drum drive unit and start/stop buttons
Price: $3,500 + gst